What next?

Well as November is fast approaching I've drawn up a list of jobs to tackle over the next month. I think I will try to tackle the following:-

1. Change rev counter cable (gauge is now dead so I hope this is the cause)
2. Realign the steering wheel (need to get a 1 1/16" socket)
3. Clean under the front wheel arches and repaint with stonechip
4. Change rocker cover gasket
5. Check rocker arm/valve stem clearances and adjust if required
6. Try to tune the carbs as the piston lift pin suggests they are running lean
7. Clean K&N air filters and apply new gaskets
8. New screws and cup washers for dash
9. Deal with some more rust and touch up paint